Solidification Agents

Solidification Agents

Powdered agents that solidify aqueous and non-aqueous waste into a stable, load-bearing solid — from solutions with extremely high dissolved solids to oils and organics.

Fluid Tech's solidification agents convert free liquid into a durable, hardened waste form suitable for licensed disposal — including waste streams that ordinary absorbents can't handle.

Solidification Products

AQUASET II-H™ is a versatile powdered solidifier that is used to treat aqueous solutions with extremely high levels of dissolved solids.

Recommended applications
  • Water, with less than 0.01 M salts or organics
  • Neutralized strong acids
  • Neutralized weak acids
  • Water-miscible organics

AQUASET II™ is a versatile powdered solidifier that is used to treat aqueous solutions with extremely high levels of dissolved solids.

Recommended applications
  • Neutralized strong acids
  • Neutralized weak acids
  • Water-miscible organics
  • Silicone emulsions

AQUASET II-GH™ is a versatile absorbent that is used to treat aqueous solutions with extremely high levels of dissolved solids.

Recommended applications
  • Water, with less than 0.01 M salts or organics
  • Neutralized strong acids
  • Neutralized weak acids
  • Water-miscible organics
  • Sludges and slurries, aqueous

PETROSET® is used to solidify aqueous solutions with low to moderate levels of dissolved solids.

Recommended applications
  • Water, with less than 0.01 M salts or organics
  • Neutralized weak acids
  • Evaporator concentrates, BWR & PWR
  • Slurries — ion exchange resins; filter pre-coat

PETROSET H™ is used to solidify aqueous solutions with low to moderate levels of dissolved solids.

Recommended applications
  • Water, with less than 0.01 M salts or organics
  • Neutralized weak acids
  • Evaporator concentrates, BWR & PWR
  • Slurries — ion exchange resins; filter pre-coat

PETROSET II™ is a finely ground, strongly organophilic solidification agent.

Recommended applications
  • Oils, hydrocarbon
  • Oils, synthetic
  • Solvents
  • Other non-aqueous liquids
  • Sludges and slurries, non-aqueous

Advantages

Volumetric efficiency

Volume increase of wastes treated using Fluid Tech products is typically less than 20%.

Leach resistance

Fluid Tech products irreversibly bind radioactive and hazardous constituents through naturally occurring ion-exchange mechanisms.

Physical integrity

Wastes solidified with Fluid Tech products maintain their physical integrity through freeze-thaw conditions.

Adaptability

Fluid Tech products are designed to be stand alone, or used in combination with one another.

How do solidification agents work?

Fluid Tech solidification agents are powdered and granular minerals — sodium montmorillonite and sepiolite — that bind free liquid into a solid waste form and irreversibly bind radioactive and hazardous constituents through naturally occurring ion-exchange mechanisms.

The “H” products — AQUASET II-H™, AQUASET II-GH™ and PETROSET H™ — contain Portland cement and set up to a hard matrix: load bearing strengths of over 5 tons per square foot, or 69 pounds per square inch, can be achieved. In either case the volume increase of the treated waste is typically less than 20%, and the solidified waste maintains its physical integrity through freeze-thaw conditions.

Which solidification agent should I use?

Start with the liquid: aqueous or non-aqueous, and how much is dissolved in it. Then choose the standard product or its hard-matrix “H” version.

  • Aqueous, low to moderate dissolved solids — water, neutralized weak acids, BWR and PWR evaporator concentrates, ion-exchange resin slurries and filter pre-coat: PETROSET® for a firm solid, PETROSET H™ for a hard matrix.
  • Aqueous, extremely high dissolved solids — neutralized strong acids and bases, water-miscible organics such as alcohols, glycols and low-molecular-weight ketones, silicone emulsions: AQUASET II™ (powder), AQUASET II-H™ (powder, hard matrix) or AQUASET II-GH™ (granular with powder, hard matrix — also for aqueous sludges and slurries).
  • Mixed wastes with heavy metals and water-miscible organics such as glycols: AQUASET II™, often used in conjunction with PETROSET® and PETROSET II™.
  • Non-aqueous liquids — hydrocarbon oils, synthetic oils, solvents, and non-aqueous sludges and slurries: PETROSET II™, a strongly organophilic solidifier.
  • Wastes with both oil and water: PETROSET II™ in combination with PETROSET® or AQUASET II™ — PETROSET II™ handles the non-water-miscible fraction.

Sludges and particle suspensions are treated with power mixing, and with the addition of small amounts of water PETROSET® and PETROSET H™ can solidify dry solids.

How much solidification agent do I need per gallon?

Loading rates from the Fluid Tech Recommended Media and Loading Rate Guide, in pounds of product per gallon of waste. Rates vary with waste chemistry — Fluid Tech provides waste-specific recommendations.

WastePETROSET®PETROSET H™AQUASET II™AQUASET II-H™AQUASET II-GH™
Water, less than 0.01M salts or organics36—56
Neutralized strong acids—74 to 55 to 86 to 9
Neutralized weak acids4 to 5 (below 0.5M)7 (below 0.5M)55 to 76 to 8
Water-miscible organics——55 to 76 to 8
Evaporator concentrates, BWR & PWR———67
Ion-exchange resin slurries and filter pre-coat46—56
Silicone emulsions——4 to 6——

For non-aqueous liquids, PETROSET II™ loads at 3 to 4 lbs/gal for hydrocarbon oils, 3 to 5 lbs/gal for synthetic oils, 3 to 6 lbs/gal for solvents, and 2 to 6 lbs/gal for other non-aqueous liquids.

Contact Fluid Tech at (423) 271-6505 for a recommendation specific to your waste stream.

Frequently asked questions

What is the difference between PETROSET® and AQUASET II™?

PETROSET® solidifies aqueous solutions with low to moderate levels of dissolved solids — water, neutralized weak acids, evaporator concentrates, and resin slurries. AQUASET II™ treats aqueous solutions with extremely high levels of dissolved solids, such as neutralized acids and bases, and water-miscible organics such as alcohols, glycols, and low-molecular-weight ketones. Both are powdered solidifiers, and PETROSET® is frequently used in combination with AQUASET II™ and PETROSET II™.

What does the “H” mean in AQUASET II-H™ and PETROSET H™?

Unlike AQUASET II™ and PETROSET®, the “H” products set up to form a hard matrix — load bearing strengths of over 5 tons per square foot, or 69 pounds per square inch, can be achieved. AQUASET II-GH™ is a granular-with-powder absorbent/solidification agent that, unlike AQUASET II-G™, also sets up to form a hard matrix. The H products contain Portland cement.

Can solidification agents treat oily or non-aqueous waste?

Yes. PETROSET II™ is a strongly organophilic solidifier that will solidify most non-aqueous liquids, such as hydrocarbon oils, synthetic oils, and solvents. Wastes with both water-miscible and water-immiscible components are solidified using PETROSET II™ in combination with PETROSET® or AQUASET II™.

Is waste solidified with Fluid Tech products stable during transport and storage?

Wastes solidified with Fluid Tech products maintain their physical integrity through freeze-thaw conditions and the vibrational stresses encountered during transportation, so no incidental or free-standing liquids develop prior to inspection at the final disposition or storage facility. The volume increase is typically less than 20%, and radioactive and hazardous constituents are irreversibly bound through naturally occurring ion-exchange mechanisms.

Are the solidification agents regulated for shipping or as hazardous waste?

PETROSET® is not regulated as dangerous goods for transport (DOT, IATA, IMDG), and AQUASET II™ is not regulated by DOT. If AQUASET II™ as supplied, and unmixed, becomes a waste, it will not meet the criteria of a hazardous waste as defined under the Resource Conservation and Recovery Act. Each product's Safety Data Sheet gives its own transport and disposal classification.

What safety precautions apply when handling solidification agents?

AQUASET II-H™, AQUASET II-GH™ and PETROSET H™ contain Portland cement: contact with water or sweat releases a caustic solution that can cause severe skin burns and serious eye damage, so wear impervious gloves such as nitrile, eye protection, and protective clothing. The products contain crystalline silica — do not breathe dust, and use only outdoors or in a well-ventilated area. PETROSET II™ is toxic to aquatic life, so release to the environment should be avoided. Review the full Safety Data Sheet before use.

Not sure which agent fits your waste?

Tell us about your waste stream and our team will recommend the right product and treatment approach.

Talk to our team