Spill Kits

Spill Kits

Grab-and-go spill response kits, fully outfitted in refillable, weather-resistant rotomolded cases — one kit for oil and organic spills, and one adding PCB screening. Made in the USA, assembled in Tennessee.

Every kit stages a complete response — absorbent, containment socks, disposal bags, and tamper-proof waste labels — in one compact case sized for a service vehicle, power room, or mounted spill station. No unpacking, no reshuffling.

Four Sweetwater Fire Rescue firefighters standing behind two open Fluid Tech spill kit cases in front of a fire engine
Sweetwater Fire Rescue with Fluid Tech spill kits — photo from the Fluid Tech PCB/Oil Kit cut sheet.

Spill Kit Products

Universal aqueous and organic spill response built around ENVIRO-G® absorbent — engineered for fast, effective containment of oil, hydrocarbon, and other organic liquid spills in the field, in the shop, or on industrial sites.

Responds to
  • Oil · Diesel · Fuel · Lubricants · Greases
  • Hydraulic, Transmission & Radiator Fluids
  • PCB-Contaminated Fluids · Organic Liquids

The EG-50's response capability plus a Clor-N-Oil® 50 PCB screening kit, eyewash, degreaser, and leak-sealing epoxy — its cut sheet lists it as approved for use on PCBs, field-tested, and RCRA compliant.

Responds to
  • Oil · PCB-Contaminated Fluids
  • Antifreeze · Solvents · Paint
  • Hydraulic Fluid · Organic Liquids

*Disposal compliance varies by jurisdiction. Contact Fluid Tech for guidance.

Advantages

Grab-and-go readiness

Everything staged in one case — compact enough for a service vehicle, power room, or mounted spill station.

Rotomolded field case

Waterproof, UV-stable, vehicle-safe, and impact-resistant — and refillable, so the case outlives the first response.

Disposal-ready

Absorbed waste is dry and stable, with disposal bags and tamper-proof waste labels included in every kit.*

Made in the USA

Assembled in Tennessee and deployed by first responders, utilities, laboratories, and transporters.

What is in a Fluid Tech spill kit?

Every kit is built around ENVIRO-G® absorbent and stages a complete response in one refillable rotomolded case: four absorbent socks (3″ × 5′), a 5 lb shaker, a 10 lb spout bag, twenty universal absorbent pads (13″ × 10″), five heavy-duty disposal bags, and six tamper-proof waste labels.

The PCB/Oil Kit (FTUTG50) adds a Clor-N-Oil® 50 PCB screening kit, Honeywell® Eyesaline® eyewash, Dynasty Guzzler® degreaser (1 qt), and J-B Weld® for sealing leaks. The case is waterproof, UV-stable, vehicle-safe, and impact-resistant, and refillable so it outlives the first response.

EG-50 or PCB/Oil Kit: which one do I need?

Choose the EG-50 Spill Response Kit for petroleum leaks, hydraulic releases and diesel spills. Choose the PCB/Oil Kit where the crew may meet oil from older transformers and electrical equipment, which can contain PCB-contaminated oil.

PCB-contaminated oil is federally regulated and changes how a spill must be handled and disposed of. The Clor-N-Oil® 50 screening kit lets the crew screen the spilled oil in the field, so the response and the disposal path match what was actually spilled.

What spills do the kits handle?

Oil, diesel, fuel, lubricants, greases, hydraulic fluid, transmission fluid, radiator fluids, PCB-contaminated fluids, antifreeze, solvents, paint, and other organic liquids. ENVIRO-G® absorbs on contact and leaves surfaces dry for sweeping and restoration.

The kits give utility crews, field techs, and maintenance teams everything needed to respond immediately to petroleum leaks, hydraulic releases, diesel spills, and other emergency response situations — in the field, in the shop, or on industrial sites.

Frequently asked questions

Do the spill kits support SPCC, EPA and OSHA compliance?

The EG-50 cut sheet lists the kit as supporting SPCC, EPA, and OSHA regulatory compliance, with RCRA-compliant, landfill-approved disposal of the absorbent media, described as non-reactive and non-leachable. The PCB/Oil Kit cut sheet lists it as approved for use on PCBs, field-tested, and RCRA compliant. Disposal compliance varies by jurisdiction — contact Fluid Tech for guidance.

Who are the spill kits designed for?

The EG-50 cut sheet lists first responders, electric and power crews, industrial maintenance, fleet and equipment maintenance, substations, construction, transportation and trucking hubs, nuclear facilities, mining companies, and hazardous response teams. The kit puts everything for oil and other organic material spill response — contained, absorbed, and disposal-ready — in one grab-and-go case.

Can used ENVIRO-G® absorbent go to a landfill?

Disposal of used media depends on what was absorbed. Per the Safety Data Sheet, if ENVIRO-G® as supplied, and unmixed, becomes a waste, it does not meet the criteria of a hazardous waste as defined under RCRA, and it can be landfilled when in compliance with local regulations. The EG-50 cut sheet describes the absorbent media as non-reactive, non-leachable, and landfill-acceptable.

Can the kits be refilled?

Yes. Both kits are housed in a refillable rotomolded storage case — item 01 on the EG-50 contents list — that is waterproof, UV-stable, vehicle-safe, and impact-resistant. The kits are made in the USA and assembled in Tennessee.

Outfitting crews for spill response?

Tell us about your operation and our team will help scope the right kits and stocking — distributor inquiries welcome.

Talk to our team